+49 (0) 41039671627
info@threeguysco.com
Premium Grade Green Antifreeze Coolant is a silicate-free, long-life formula specifically designed to meet the chemical requirements of vehicle engine manufacturers using an antifreeze coolant. This ready-to-use formula makes top-offs easier and requires no mixing.
IAT Coolant Compatibility: Ideal for classic and vintage vehicles requiring Inorganic Acid Technology (IAT) coolants.
Pre-Mixed Convenience: Comes pre-mixed with deionized water for hassle-free use.
Optimal Performance: Ensures efficient heat transfer for peak engine performance.
All-Weather Protection: Prevents freeze-ups in cold weather and boil-overs in hot weather.
Corrosion Protection: Provides rust and corrosion protection for all cooling system metals, including aluminium.
Recommended for Use in: TOYOTA, HONDA, HAVAL, AUDI, LEXUS, KIA, MG, CHANGAN, PROTON, HYUNDAI, SUZUKI, ISUZU
Directions for Use:
DRAIN: Allow the engine to cool, remove the radiator cap, and drain the existing coolant as per the manufacturer’s instructions. Close the drain plug after draining.
FLUSH: Consider using THREE GUYS Radiator Flush to remove debris and clean the engine block before refilling.
FILL: Refer to the owner’s manual for coolant capacity. Fill with THREE GUYS Antifreeze Coolant without adding water. Start the vehicle, set the heater to high, and run without the cap until normal temperature is reached. Run for 10 minutes with the heater on after it heats up. Check the coolant level, top off, and replace the cap. Turn off the engine.
MAINTAIN: Regularly monitor radiator and reservoir levels. Add THREE GUYS Antifreeze Coolant as necessary. Ensure freeze protection to -34 °F. Check for leaks in the cooling system.
Ensure your vehicle’s cooling system operates efficiently with THREE GUYS Antifreeze Coolant, providing optimal performance and protection in all weather conditions.